Fujitsu PRIMERGY TX200 S2 User Manual

38
Chapter 1 Overview
■ Inserting the Floppy Disk
Insert the floppy facing the label up into the floppy disk drive at the side with a shutter. It makes a
clicking sound and, the floppy disk eject button pops out.
■ Ejecting the Floppy Disk
Make sure that the floppy disk access LED is off. Press the floppy disk eject button.
 Do not eject the floppy disk while the floppy disk access LED is on. Doing so may damage data.
Floppy disk
Floppy disk eject button
Floppy disk access LED

Fujitsu PRIMERGY TX200 S2 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX200 S2
Category	Server
Language	English