Fujitsu PRIMERGY TX200 S2 - Page 47

47
PRIMERGY TX200 S2 User’s Guide
2
Checking before OS Installation
 You can turn the power on from a client (via a LAN) by utilizing the Wakeup On LAN (WOL) function.
Refer to "5.5.5 Turning the Power On via a LAN" (pg.155).
 Be sure to install ServerView to control the power supply via a LAN.
■ SCSI Setup Utility
The SCSI Setup Utility is used for setting the onboard SCSI of this server.
Check or change settings as necessary before installation, referring to "8.3 SCSI Setup Utility"
(
pg.251).