Fujitsu PRIMERGY TX200 S2 User Manual

59
Chapter 3
OS Installation Using
ServerStart
This chapter explains how to install the OS in the
server using ServerStart.
3.1 Guided Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
3.2 Preconfiguration Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 76
3.3 Expert Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
3.4 Remote Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
3.5 Installation on Multiple (the Second and Subsequent) Servers
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

Fujitsu PRIMERGY TX200 S2 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX200 S2
Category	Server
Language	English