Fujitsu PRIMERGY TX200 S2 User Manual

77
PRIMERGY TX200 S2 User’s Guide
3
OS Installation Using ServerStart
2 Click [FloppyBuilder].
The [ServerStart FloppyBuilder] window appears.
3 Click [ServerStart Status Diskette].
A message prompting you to insert the floppy disk appears.
4 Insert the ServerStart floppy disk supplied with the server and click [OK].
 Set the ServerStart floppy disk in the write-enabled state.
Creation of a ServerStart floppy disk starts. When the creation is completed, the "Floppy disk has
been created." message appears.
5 Click [OK].
6 Click [ (HOME)] on the tool bar.
The display returns to the [Welcome to ServerStart] window.
7 Click [Click here to prepare an operating system installation for a PRIMERGY
Server].
The [Prepare the installation of an operating system for PRIMERGY Servers] window.
 Before starting installation, click [Cautions for Installation] and read the contents. Important
information such as limitations on disk configuration is described.
8 Click [Creation of a ServerStart Configuration file for the installation of an
Microsoft Windows Operating System].
The [Microsoft Windows Operating System Installation] window appears.

Fujitsu PRIMERGY TX200 S2 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX200 S2
Category	Server
Language	English