Fujitsu PRIMERGY TX200 S2 - Page 89

89
PRIMERGY TX200 S2 User’s Guide
3
OS Installation Using ServerStart
9 When a message on installation completion appears, press any key.
10 Restart the system.
Click [Start] → [Shutdown]. Select [Restart] and click [OK].
The system restarts.
11 When the system restarts, log on to the server using the Administrator account
for the local computer.
The server setup and OS installation have been completed.
Refer to "Chapter 5 Operations after OS Installation" (pg.133) and perform necessary procedures
before starting server operations.