Fujitsu Scan Snap S1300i User Manual

Actions (for Windows Users)
178
4. Press the [Scan] button on the ScanSnap to start a scan.
D Scanned images will be sent to the mobile device from the computer when the
scanning is completed.
5. Click the [Close] button to close the [Scan to Mobile] dialog box when
sending of the scanned image is completed.
ATTENTION
To enable automatic linkage with Scan to Mobile, press the [Scan] button on the ScanSnap and start
a scan while [Scan to Mobile] is active (where this application is currently selected on the taskbar
and the [Scan to Mobile] dialog box is brought to front).
HINT
When you select the [Wait until the [Send] button is clicked] check box in the [Scan to Mobile - Basic]
dialog box, the [Send] button appears in the [Scan to Mobile] dialog box. Click the [Send] button to
send the image to the mobile device.
HINT
The [Scan to Mobile] dialog box closes automatically when the mobile device is disconnected from
the computer.

Fujitsu Scan Snap S1300i Specifications

General

Optical Resolution	600 dpi
ADF Capacity	10 sheets
Interface	USB 2.0
Color Depth	24-bit
Duplex Scanning	Yes
Scanning Method	CIS (Contact Image Sensor)
Scanner Type	Sheetfed
Max Document Size	A4
Scan Speed	12 ppm (simplex), 24 ipm (duplex)
Dimensions	284 x 99 x 77 mm
Weight	1.4 kg
Supported Operating Systems	Windows, macOS
Power Source	USB Bus Power