Fujitsu Scan Snap S1300i User Manual

Installing in Windows
45
7. Confirm the check boxes of the software you want to install are selected,
and click the [Next] button.
D The [Choose Destination Location] screen appears.
8. Confirm the destination folder, and then click the [Next] button.
D A confirmation about accepting the license agreement appears.
9. Read the "END-USER LICENSE AGREEMENT", select [I accept the terms
of the license agreement], and then click the [Next] button.
D The [Start Copying Files] screen appears.
10.Confirm the settings, and then click the [Next] button.
D Installation starts. When the installation is complete, the [About ScanSnap's Auto
Power OFF function] screen appears.
ATTENTION
z The software will not be installed unless the check box is selected.
z Note that you must install ScanSnap Manager. Also, it is recommended to install all software in
order to utilize the features of the ScanSnap.
HINT
Depending on the number of the installed software, this step may be required more than once.

Fujitsu Scan Snap S1300i Specifications

General

Optical Resolution	600 dpi
ADF Capacity	10 sheets
Interface	USB 2.0
Color Depth	24-bit
Duplex Scanning	Yes
Scanning Method	CIS (Contact Image Sensor)
Scanner Type	Sheetfed
Max Document Size	A4
Scan Speed	12 ppm (simplex), 24 ipm (duplex)
Dimensions	284 x 99 x 77 mm
Weight	1.4 kg
Supported Operating Systems	Windows, macOS
Power Source	USB Bus Power