XG Series User's Guide Chapter 6 Managing the Device
Verifying the Device Operations
569
slot2_temp
temperature around Expansion Card (SLOT2).
At the time of three following states, "--" is displayed.
The Expantion Card without Thermal Sensor is installed. (CX4)
The Invalid Expantion Card is installed.
The Expantion Card is not installed.
9) Slot Information
The type of Expansion Card.
SJ10GCX4Z : Installed Expansion Card is SJ10GCX4A. (CX4)
SJ10GSFPZ : Installed Expansion Card is SJ10GSFPA. (SFP+)
NO_PRESENT : The Expantion Card is not installed.
UNKNOWN : Installed Expansion Card is Invalid Card.
10) power_consumption
Power consumption of the device.
XG0440DC / XG0440DCR
1) Current time
Present date and time.
2) Startup time
Date and time when the system started up.
3) restart_cause
Cause for the system startup.
The following system startup causes are displayed:
power on : The power has been turned on.
reset : The reset command has been issued.
reset switch : The [RESET] switch has been pressed.
system down : System-down has occurred.
4) machine_state
State of the device
RUNNING : The device is active.
FALLBACK : The device is into fallback state.
5) access_direction
Direction where a device is installed in.
front access : The device should be installed forward. (XG0440DC)
rear access : The device should be installed backward. (XG0440DCR)
# show system status
Current-time :
Fri Dec 18 17:04:50 2009 ---(1)
Startup-time :
Fri Dec 18 16:04:36 2009 ---(2)
restart_cause : power on ---(3)
machine_state : RUNNING ---(4)
access_direction :
rear access ---(5)
power_redundancy : redundant ---(6)
PSU1 state : NORMAL ---(7)
PSU2 state : NORMAL
PSU1 type : AC ---(8)
PSU2 type : AC
power_consumption : 78 W ---(9)
FAN state : NORMAL ---(10)
inspiration_state : NORMAL ---(11)
warning time :
Fri Dec 18 17:00:45 2009 ---(12)
recover time :
Fri Dec 18 17:02:30 2009
internal_state : NORMAL
inspiration_temp : 28 C ---(13)
internal_temp : 33 C
To Next Page
Loading...
