1.3 Have the Web MMI for FELCOM-250/500 Displayed
1-20
Step 4) Handling the Web MMI
The Web MMI is equipped with the User mode, the Administrator's mode where
settings can be made, and the Service mode where settings can be made and
maintenance works can be executed. When the screen is set to each of these modes, the
menus corresponding to each mode will be added to the menus displayed upon the
Navigation bar area menu.
How to set the Web MMI to Administrator's mode
If you click [admin login] upon the Web MMI, the screen [Administrator login] will
be displayed; enter the following into the screen.
Username : Admin
Password : 01234567 (this password can be changed)
How to set the Web MMI to Service mode
If you click [admin login] upon the Web MMI, the screen [Administrator login] will
be displayed; enter the following into the screen.
Username : Service
Password : fb5963 (not changed)
Click [admin login]
User screen
Menu added
To Next Page
Loading...
Need help?
General
