EasyManuals Logo

Furuno FELCOM 250 Service Manual

Furuno FELCOM 250
462 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #220 background imageLoading...
Page #220 background image

7.1 LAN IP address
7-9
4) Setting a fixed IP address for the handset
This method sets a Static IP address on the Handset side and does not use the DHCP
server for the communication unit.
4.1) Upon the Handset, select; Settings -> Network -> Administrators password:
01234567 -> Manual.
4.2) Open IP obtain -> Static IP, and set the IP address.
- IP address : The IP addresses within the range of 192.168.1.2 to
192.168.1.9 are appropriate.
- Subnet Mask : 255.255.255.0
- Default Gateway : 192.168.1.1 -> Own IP address
4.3) Select DNS, open Static, and enter the IP address for the DNS server.
The IP address for DNS server is the “Own IP address”, which is 192.168.1.1.
4.4) Reboot the Handset, open Info -> TCP/IP, and confirm that the IP address is set in
the Handset.
Note) Since the DHCP server will be allocating the IP
addresses within the range of 192.168.1.10 to
192.168.254, the IP addresses within the range of
192.168.1.2 to 192.168.1.9 would be appropriate.
Static IP setting TCP/IP info. DNS setting

Table of Contents

Other manuals for Furuno FELCOM 250

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Furuno FELCOM 250 and is the answer not in the manual?

Furuno FELCOM 250 Specifications

General IconGeneral
BrandFuruno
ModelFELCOM 250
CategoryMarine GPS System
LanguageEnglish

Related product manuals