Furuno FELCOM 250 Service Manual

 Chapter 13 Q&A
13-10
Procedure for the countermeasure
1. Attaching mesh tape L
Place the mesh tape L in between the (4) clamper L for both the Antenna side and the
frame side, and then fix it using (5) the screws, (6) washers, and (7) nylon nuts.
Note) Make sure that the end of the mesh tape is protruded from clamper L.
Antenna side
Frame side
Fix (4) clamper L using (5)
the screws, (6) washers,
and (7) nylon nuts.
(2) Mesh tape L
Fix (4) clamper L using (5)
the screws, (6) washers,
and (7) nylon nuts.

Furuno FELCOM 250 Specifications

General

Brand	Furuno
Model	FELCOM 250
Category	Marine GPS System
Language	English