Gateway Notebook Reference Guide

CHAPTER 3: Setting Up and Getting Started
30
Running the TouchStrip Tutorial
Before using the fingerprint reader the first time, you should
run the TouchStrip Tutorial which teaches you the correct
method to use the fingerprint reader.
To run the TouchStrip Tutorial:
1 Click (Start), All Programs, Protector Suite QL, then
click Fingerprint Tutorial.
2 Click Next to proceed through the tutorial.
Enrolling your fingerprints
Before you can use the features of the fingerprint reader, you
must enroll your fingerprints so your notebook can identify
you.
To enroll your fingerprints:
1 Click (Start), All Programs, Protector Suite QL, then
click User Enrollment. The Welcome screen opens.
2 Click Next. The Finish screen opens.
3 Select one of the following options, then click Next.
• Enrollment to the biometric device—Select this
option to save your fingerprint to memory in the
fingerprint reader. Use this option to prevent
unauthorized use of your notebook even if the hard
drive has been removed.
• Enrollment to the hard disk—Select this option to
save your fingerprint to the hard drive. If you plan
to enroll more than 21 fingerprints, you must select
this option.

Gateway Notebook Specifications

General

Brand	Gateway
Category	Laptop
Processor	Varies by model (Intel Celeron, Pentium, Core i3, Core i5, AMD Ryzen)
RAM	Varies by model (8GB, 16GB)
Storage	Varies by model (256GB SSD, 512GB SSD, 1TB HDD)
Display	Varies by model (14-inch, 15.6-inch, FHD)
Operating System	Windows 10 or Windows 11
Graphics	Intel UHD Graphics
Battery	Varies by model
Weight	Varies by model