www.gateway.com
123
To check the memory:
1 Click (Start), then click Control Panel. The
Control Panel window opens.
2 Click System and Maintenance.
3 Click Administrative Tools.
4 Double-click Memory Diagnostics Tool, then follow
the on-screen instructions.
You see a “Not enough memory” error message
• Close all programs, then restart your notebook.
Memory card reader
Drive letter for the memory card slot does not appear in
the My Computer window
• Reboot your notebook.
Modem (cable or DSL)
The modem does not connect
• Make sure that the modem cable is plugged into the
Ethernet network jack and not the modem jack. For the
location of your network jack, see “Right” on page 8.
• See the documentation that came with your modem for
additional troubleshooting information.
Modem (dial-up)
Your modem does not dial or does not connect
• Make sure that the modem cable is plugged into the
modem jack and not the Ethernet network jack. For the
location of your modem jack, see “Right” on page 8.
• Make sure that your notebook is connected to the
telephone line and the telephone line has a dial tone.
Help
For more information about troubleshooting memory errors,
click Start, then click Help and Support. Type the keyword memory
error in the Search Help box, then press E
NTER.
To Next Page
Loading...
Need help?
General
