135
Using telephone features
www.gateway.com
To make a call using a Quick Dial memory key entry:
1 If PhoneTools is not open, click Start, All Programs, PhoneTools, then click
PhoneTools.
2 If the Phone controls are not visible, click Phone.
3 Click the memory key next to the memory entry that you want to call.
4 Make the call on the speakerphone by clicking Speaker. You must have
external speakers and a microphone connected to your computer.
- OR -
Make the call on the telephone handset by picking up the handset, then
clicking on the handset on the screen. You must have a telephone
connected to your computer.
5 To end the call, click (hangup).
To remove a Quick Dial memory key entry:
1 If PhoneTools is not open, click Start, All Programs, PhoneTools, then click
PhoneTools.
2 If the Phone controls are not visible, click Phone.
3 Right-click the memory entry that you want to remove, then click Delete.
4 Click OK.
8509203.book Page 135 Tuesday, July 1, 2003 7:54 PM
To Next Page
Loading...
Need help?
General
