239
Upgrading the Gateway Tower and Mid Tower Cases
www.gateway.com
Replacing the system board
To replace the system board:
1 Identify your computer case style. For more information, see “Identifying
your computer case style” on page 220.
2 Open the case by following the instructions in “Opening the case” on
page 221.
3 For more stability, place your computer on its side. To avoid scratching
the case, place it on a towel or other non-abrasive surface.
4 Remove all of the add-in cards by following the instructions in “Adding
or replacing add-in cards” on page 232.
5 Disconnect the power and data cables from the system board, noting their
locations and orientation. (You will reconnect the cables after you install
the new board.)
8509203.book Page 239 Tuesday, July 1, 2003 7:54 PM
To Next Page
Loading...
Need help?
General
