238
Chapter 13: Upgrading Your Computer
www.gateway.com
6 Slide the power supply toward the front of the case, then up.
7 Install the new power supply into the case, then flip the power supply
retention clip in until it locks into place.
8 Reconnect the power supply cables using your notes from Step 4. See the
power supply documentation for further instructions.
9 Close the case by following the instructions in “Closing the case” on
page 224.
8509203.book Page 238 Tuesday, July 1, 2003 7:54 PM
To Next Page
Loading...
Need help?
General
