266
Chapter 13: Upgrading Your Computer
www.gateway.com
Closing the case
To close the Gateway New Micro Tower case:
1 Make sure that all of the internal cables are arranged inside the case so
they will not be pinched when you close the case.
2 Align the door tabs into the case notches.
3 Swing the side panel toward the case until the release handle locks.
4 If you removed the case cover shipping screw, replace the screw.
5 Reconnect the cables and power cord.
Case notches
8509203.book Page 266 Tuesday, July 1, 2003 7:54 PM
To Next Page
Loading...
