134
Chapter 7: Using PhoneTools
www.gateway.com
Using Quick Dial memory keys
You can assign frequently called numbers to Quick Dial memory keys.
To set up a Quick Dial memory key:
1 If PhoneTools is not open, click Start, All Programs, PhoneTools, then click
PhoneTools.
2 If the Phone controls are not visible, click Phone.
3 Click an empty memory entry. The Add Quick Dial window opens. If all
the memory entries on the current page are in use, click a memory page
button to see more entries.
4 In the Identifier box, type the name you want to see in the Quick Dial
memory entries list.
5 In the Name box, type the name of the person associated with this memory
entry.
6 In the Number box, type the telephone number associated with this
memory entry, then click
OK. The entry you created appears in the
Quick Dial memory entries list.
Memory entries
Memory page buttons
Quick Dial
memory keys
8509203.book Page 134 Tuesday, July 1, 2003 7:54 PM
To Next Page
Loading...
Need help?
General
