218
Chapter 13: Upgrading Your Computer
www.gateway.com
Selecting a place to work
Work on your computer in an area that:
■ Is clean (avoid dusty areas)
■ Is a low-static environment (avoid carpeted areas)
■ Has a stable surface on which to set your computer
■ Has enough room to place all the computer parts
■ Is near a grounded outlet so you can test your computer after installation
■ Is near a telephone (in case you need help from Gateway Technical
Support). The telephone must be directly connected to a telephone jack
and cannot be connected to your computer
Gathering the tools you need
Some tools and supplies that you may need to work on your computer are:
■ A Phillips screwdriver
■ A flat-head screwdriver
■ A notebook to take notes
■ Small containers to store various types of screws
■ A grounding wrist strap (available at most electronic stores)
Tips & Tricks When cleaning the case, do not use abrasive or solvent
cleaners because they can damage the finish. Use soap
and water or a dilution of water and isopropyl alcohol. For
more information, see “Cleaning your computer” on
page 202.
8509203.book Page 218 Tuesday, July 1, 2003 7:54 PM
To Next Page
Loading...
Need help?
General
