Gateway Tower - Adding or replacing a hard drive

229
Upgrading the Gateway Tower and Mid Tower Cases
www.gateway.com
Adding or replacing a hard drive
Use these instructions to add or replace hard drives.
To add or replace a hard drive:
1 Identify your computer case style. For more information, see “Identifying
your computer case style” on page 220.
2 Open the case by following the instructions in “Opening the case” on
page 221.
3 If you are replacing a drive, disconnect the drive cables, noting their
locations and orientation. (You will reconnect the cables after you install
the new drive.) See the drive documentation for further instructions.
Power cableData ribbon
cable
8509203.book Page 229 Tuesday, July 1, 2003 7:54 PM