279
Upgrading the Gateway New Micro Tower Case
www.gateway.com
8 Reconnect the power supply cables using your notes from Step 4. See the
power supply documentation for further instructions.
9 Close the case by following the instructions in “Closing the case” on
page 266.
Replacing the system board
To replace the system board:
1 Identify your computer case style. For more information, see “Identifying
your computer case style” on page 220.
2 Open the case by following the instructions in “Opening the case” on
page 263.
3 Remove the front bezel by following the instructions in “Adding or
replacing a CD, DVD, or diskette drive” on page 267.
4 Remove all of the add-in cards by following the instructions in “Adding
or replacing add-in cards” on page 275.
5 Remove the power supply by following the instructions in “Replacing the
power supply” on page 277.
8509203.book Page 279 Tuesday, July 1, 2003 7:54 PM
To Next Page
Loading...
