275
Upgrading the Gateway New Micro Tower Case
www.gateway.com
Adding or replacing add-in cards
An add-in card is a card used in the computer to add functionality to the system.
Use the following instructions to replace, add, or reseat an add-in card.
To replace, add, or reseat an add-in card:
1 Identify your computer case style. For more information, see “Identifying
your computer case style” on page 220.
2 Open the case by following the instructions in “Opening the case” on
page 263.
3 If you are replacing a card, disconnect any cables that are attached to the
card, noting their locations and orientation. (You will reconnect the cables
after you install the new card.) See the add-in card documentation for
further instructions.
4 Swing the add-in card retention cover open.
8509203.book Page 275 Tuesday, July 1, 2003 7:54 PM
To Next Page
Loading...
