221
Upgrading the Gateway Tower and Mid Tower Cases
www.gateway.com
Upgrading the Gateway Tower and
Mid Tower Cases
The Gateway Tower and Mid Tower cases provides toolless access to internal
components.
Opening the case
To open the computer case:
1 Identify your computer case style. For more information, see “Identifying
your computer case style” on page 220.
2 Follow the instructions in “Preventing static electricity discharge” on
page 219.
3 Shut down your computer, then disconnect the power cord and modem,
network, and all peripheral device cables.
4 Press the power button to drain any residual power from your computer.
5 If your case cover has a case cover shipping screw installed on the back
of the case, remove the screw. For information about the location of the
screw, see “Gateway Tower Back” on page 5 and “Gateway Mid Tower Back”
on page 10.
Warning To avoid exposure to dangerous electrical voltages and
moving parts, turn off your computer, then unplug the
power cord and modem cable before opening the case.
8509203.book Page 221 Tuesday, July 1, 2003 7:54 PM
To Next Page
Loading...
Need help?
General
