241
Upgrading the Gateway Tower and Mid Tower Cases
www.gateway.com
7 Slide the system board toward the front of the case, then up and out of
the case. The system board standoffs slide out of the keyhole slots.
8 Slide the new system board into the keyhole slots and lock it into place
with the thumbscrew.
Important The new system board must have special standoffs
(
pem studs
) mounted on the bottom of the board. If
necessary, use the standoffs from the original system
board.
Standoff
Keyhole slot
8509203.book Page 241 Tuesday, July 1, 2003 7:54 PM
To Next Page
Loading...
