255
Upgrading the Gateway Micro Tower Case
www.gateway.com
7 Insert the new drive, then slide the release lever toward the front of the
case to lock it into place.
8 Reconnect the drive cables using your notes from Step 3. The red-striped
edge on the data ribbon cable indicates Pin 1 and corresponds with Pin 1
on the drive (typically on the side farthest from the power supply
connection). See the drive documentation for more information.
9 Close the case using the instructions in “Closing the case” on page 247.
8509203.book Page 255 Tuesday, July 1, 2003 7:54 PM
To Next Page
Loading...
