257
Upgrading the Gateway Micro Tower Case
www.gateway.com
5 Swing the add-in card retention cover open.
6 If you are replacing an add-in card, remove the old add-in card.
You can slightly seesaw the card end-to-end to loosen the card, but do not
bend the card sideways.
Warning Do not touch the contacts on the bottom part of the add-in
card. Touching the contacts can cause electrostatic
damage to the card.
8509203.book Page 257 Tuesday, July 1, 2003 7:54 PM
To Next Page
Loading...
