CS875-575-375-275-175 Installers Manual with CS5500 keypad B.7.8
7.1.1.1.8 X-10 Address A menu option that sets the address of an X-10 device. This is a unique
number assigned to an X-10 device. It consists of the module number and
house code. The system uses this address to identify the device.
7.1.1.1.8.1 Module Number A menu option that sets the X-10 module number used to identify a particular
X-10 device on the selected module.
A CSx75 bus module number is assigned to each system module. The system
uses this number to identify the module. It is also used to report module
problems (such as tampers and module supervision lost) to the central station.
7.1.1.1.8.2 House Code A menu option that sets the code used to identify a particular premises. It is
necessary in case any neighbouring premises also has an X-10 home
automation system.
More information on the X-10 home automation system can be found at
www.x-10europe.com.
7.1.2 Schedules A menu entry that groups scheduling options. These options set the times to
start and end an operation.
7.1.2.1.1 Opening A menu option that sets the time at which the selected schedule enters the
open state.
7.1.2.1.2 Closing A menu option sets the time at which the selected schedule enters the closed
state.
7.1.2.1.3 Active A menu option that specifies the days of the week that a particular schedule is
active.
7.1.2.1.3.2 Disable on Holidays A menu option that activates the holidays feature. The selected schedule is not
active on the dates specified in Date of holidays.
7.1.3 Date of holidays A menu option that sets the dates of holidays. If the holidays feature
(7.1.2.1.3.2) has been enabled, no schedules are active on these dates. Up to
eight holidays per month can be specified.
7.1.4 Users A menu option that specifies the zone or user number that triggers the output
on the expander module or power module.
7.1.4.1.1 Outputs A menu option that specifies which outputs the selected user can operate. The
users menu can be used only when event 45 (code entry) is used.
7.1.5 Model A menu option that displays the current model of the selected output expander.
7.1.6 Version A menu option that displays the current software version of the selected output
expander.
7.1.7 Default Settings A menu option that defaults the selected output expander.
Location Term Definition
To Next Page
Loading...
Need help?
General
