CS875-575-375-275-175 Installers Manual with CS5500 keypad A.5.4
1. Navigate with the µ¶ keys to the relevant menu option and press OK.
2. Press OK to select the language you want to edit.
3. The current text for the menu option is displayed, for example, Zone 2.
4. Do one of the following:
• Press µ to toggle between insert mode and overwrite mode (insert mode allows you to insert new text and
overwrite mode allows you to overwrite existing text).
• Press ¶ to delete the character at the cursor position.
• Press #¶ to delete all the characters from the character at the cursor position to the end of the string.
5. Press the keys 0 to 9 to insert new characters. Each key cycles through lower case and then upper case
characters.
6. Press OK to accept the changes. The keypad beeps once to confirm the change and returns to the menu
option.
7. Press NO to cancel the changes and return to the menu option.
<
A flashing cursor highlights the character you are editing. Press F2 to toggle flashing on the current word.
5.7.2 Example
To change a zone name from Zone 2 to Upstairs:
1. Navigate to Zone 2 and press OK.
2. Press #F1 to go to the start of the zone name.
3. Press #¶ to delete all the characters.
4. Press 8 four times to enter the upper case letter ‘U’.
5. Press 7 once to enter the lower case letter ‘p’. Continue until you have entered the new zone name.
6. Press OK to save your changes.
<
Each character key cycles through lower and upper case letters and language specific characters.
5.7.3 Word library
The word library is a predefined collection of words that speeds up text editing. As you type a character, the
keypad automatically displays a matching word. The word library is enabled by default. For a complete list of
words in the word library, see chapter C-1 Appendix 6: Word library words.
• To accept the word, press F3. The cursor moves to the end of the new word and you can continue to enter
text.
• To accept a shortened version of the word, press F3 to accept the word. Then move the cursor to the
unnecessary characters and press ¶ to delete them.
• To reject the word, continue entering text as normal.
• Press the µ¶ keys to scroll through the list of word library words.
• To disable the word library:
1. Navigate with the µ¶ keys to Word Library and press OK.
2. The current state of the word library is displayed. In this case, it is enabled.
3. Use the µ¶ keys to change the state to disabled and press OK.
To Next Page
Loading...
Need help?
General
