CS875-575-375-275-175 Installers Manual with CS5500 keypadB.2.3
2.2.3 Editing a zone type
A zone type is a collection of characteristics. All the zones included in a particular zone type share the same
characteristics. Each zone must belong to a zone type. There are 20 pre-defined zone types which you can edit. To
edit a zone type, you must enable the advanced menu. The following example edits a burglary zone type so that
the input type is 24-hour and it can be automatically bypassed after five alarms within one arm period.
1. Ensure the advanced menu is enabled. See chapter 20 for more information.
2. Navigate with the µ¶ keys to Control Panel>Inputs>Zone Types and press OK.
3. Select Burglary>Input Type>24-hour>Yes and press OK.
4. The keypad beeps once to confirm the change and returns to 24-hour.
5. Scroll to Attributes>Swinger Shutdown>Yes and press OK.
6. The keypad beeps once to confirm the change and returns to Swinger Shutdown.
7. Set the value of Inputs>Swinger Shutdown to 5. For more information see Setting swinger shutdown below.
2.2.4 Setting swinger shutdown
Swinger shutdown allows the selected zone to be automatically bypassed after a specified number of alarms. To
configure swinger shutdown, you must enable the advanced menu. The following example sets swinger shutdown
to 5. This means that any zone for which swinger shutdown is enabled can be activated five times within one arm
period before it is automatically bypassed.
1. Ensure the advanced menu is enabled. See chapter 20 for more information.
2. Navigate with the µ¶ keys to Control Panel>Inputs>Swinger Shutdown and press OK.
3. Enter 5 and press OK.
4. The keypad beeps once to confirm the change and returns to Swinger Shutdown.
To Next Page
Loading...
Need help?
General
