CS875-575-375-275-175 Installers Manual with CS5500 keypadB.17.3
Fire Restore See Fire event message.
First Open The time at which the first area was opened.
Keypad Tamper A keypad tamper.
Last Close The time at which the last area was closed.
Late Close A user disarmed the system after the closing time specified in the panel schedules.
Listen-in The start of a listen-in session.
Log Full The event log is full and the events must be reported to the up/download software. An event can also be sent to the
central station.
Low Batt Restore See Low Battery event message.
Low Battery The standby battery for the control panel/expansion module is low.
Mains Fail Restore See Mains Failure event message.
Mains Failure The 220 V has disappeared.
Manual Fire A manual fire alarm generated by pressing the keys 1 and 3 on the keypad.
Manual Test A manual test call to the central station.
Medical (Aux2) A medical alarm generated by pressing the keys 4 and 6 on the keypad.
Open (disarm) Opening (disarm) by a specific user.
Output An output has been activated or restored. The output number is logged. This is linked to the output module number.
Output Restore See Output event message.
Output Trip An output has been activated.
Over-current An excessive amount of current has been drawn from one of the outputs.
Over-current Restore See Over-current event message.
PA Panic Alarm A personal attack alarm has been tripped.
Panic Keypad A panic alarm generated by pressing the keys 7 and 9 on the keypad.
Partarm See Partial Arm event message.
Partial Arm Part arm of the system by a specific user.
Recent Closing An alarm occurred within five minutes of the panel being armed.
Re-exit A special feature of false alarm preventing.
Reset A user has manually reset a smoke detector.
RF Jam Restore See RF Jammed event message.
RF Jammed RF jamming.
RF Low Battery An RF transmitter has reported a low battery.
RF Low Battery Restore See RF Low Battery event message.
Service End End of the ‘Installer on-site’ (service mode).
Service Start Start of the ‘Installer on-site’ (service mode).
Silent Panic A silent panic alarm.
Siren Tamper A siren tamper.
Table 17-2: Event list
Event message Explanation
To Next Page
Loading...
Need help?
General
