GE Security CS275 User Manual

CS875-575-375-275-175 Installers Manual with CS5500 keypadB.17.5
17.5 Event Log A menu command that is used to view the event log. The event log is a list of
events that occur in the system, regardless of the armed state of the system.
They are held in a sequential event buffer with a time and date stamp. When
the log is full, it overwrites the oldest entries with new data. These events can
later be viewed through downloading.
17.6 X-10 Devices A menu option that lists the X-10 devices that can be turned ON/OFF.
17.7 Advanced Menu A menu option that activates certain options in the installer menu structure.
17.8 Zone Status A menu entry that indicates the zone status.
17.9 Device/Location Programming A menu command that switches into backward compatible programming
mode. This mode uses devices, locations and segments.
In this mode:
The OK/Menu key is used instead of the * key.
The F2 key is used instead of the Exit key.
Please note that the recommended programming method is to use the menu
structure rather than devices and locations.
Location Term Definition

GE Security CS275 Specifications

General

Brand	GE Security
Model	CS275
Category	Security System
Language	English