102 TruVision DVR 40 User Manual
2. To view the default log options
In the View log menu press Enter or left-click the mouse. The results are shown in the window
underneath.
3. To setup the search by type
a. In the View Log menu go to the Search by list box and select one of the four options: All,
Category & Time, Time, and Category.
Note: If the options All or Time are selected, the main and sub type options are not be available.
b. Go to the Main Type list box and select one of the types listed.
c. Go to the Sub Type list box and select one of the types listed.
4. To setup the search by date and time
a. In the View Log menu go to the Start Time edit box and press Enter or left-click the mouse to
enter edit mode. Enter the values using the on-screen keyboard or the numeric buttons on the
front panel. When finished, press Enter or left-click the mouse to exit edit mode.
Note: Time is written in the 24-hour format.
b. Go to the End Time edit box and press Enter or left-click the mouse to enter edit mode. Enter
the values using the on-screen keyboard or the numeric buttons on the front panel. When
finished, press Enter or left-click the mouse to exit edit mode.
5. To search for the logs
Go to the Search Log button and press Enter or left-click the mouse to start the search.
When the search is completed, the TVR 40 will list all matched log information in the window
underneath.
6. If you want to see further information on the logs, such as local or remote users, select Expand
Details. Select again to return to the original log window.
7. Go to OK and press Enter or left-click the mouse to return to the System menu.
8. Press OK to save the changes and return to the main menu.
Rebooting the TVR 40
To reboot the TVR 40
1. In the System menu go to the Reboot TVR edit box and press Enter or left-click the mouse. The
system immediately reboots.
To Next Page
Loading...
