TruVision DVR 40 User Manual 83
3. Go to the Protocol list box and select one of the built-in PTZ protocols listed.
GE RS-485 ASCII LG
GE RS-485 (default) Infinova
VideoTec HIKVISION
VCL SpeedDome DM DynaColor
Techwin DennardDome
EVI-D30 DeltaDome
Samsung BBV
Siemens Tyco AD
Philips 3 AD
Philips 2 Pelco D
Philips Pelco P
Panasonic
4. In the PTZ Addr. box enter a three-digit number for your PTZ address. It should correspond with
the address used in the selected PTZ camera. Use the numeric buttons on the front panel, or the
on-screen numeric keypad if using the mouse, to enter the number. If using the front panel, press
the joystick for Enter.
5. When completed, select OK to return to the PTZ menu.
6. When you have made all the changes required in the Alarms menu, go to OK and press Enter or
left-click the mouse to save all changes and return to the main menu.
Using preset positions
The preset position is the function to program monitoring positions (preset positions) associated with
position numbers. By entering the position number, you can move cameras automatically to the
preset positions. You can set up to 128 preset numbers. A preset point is a three-digit number. This
option is only available with cameras provided with the preset feature.
To Next Page
Loading...
