TruVision DVR 40 User Manual 39
Menu timeout
This is the time after which the selected menu screen reverts to the live mode.
To setup the menu timeout
1. In the Display menu go to the Menu Timeout list box and press Enter or left-click the mouse. Select
the time.
2. When you have made all the changes required in the Display menu, go to OK and press Enter or
left-click the mouse to save all changes and return to the main menu. Press the Menu button to
return to live mode.
Selecting video standard
The TVR 40 can support PAL or NTSC video output. PAL is the default format.
To select the video standard
1. In the Display menu go to the Video Standard list box and press Enter or left-click the mouse.
Select either NTSC or PAL video output format.
Note: If you are using default settings but the images on screen flicker, there is a NSTC/PAL mismatch.
Check the NTSC/PAL option selected in the Display menu.
2. When you have made all the changes required in the Display menu, go to OK and press Enter or
left-click the mouse to save all changes and return to the main menu. Press the Menu button to
return to live mode.
Video scaling
You can change the settings of the monitor display size to accommodate for differently sized
monitors.
To adjust the screen scaling
1. In the Display menu go to the Video Scaler and press Enter or left-click the mouse to enable the
check box () .
When disabled, the video output display resolution is 704 x 576 PAL (or 704 x 480 NTSC). When
activated the display resolution becomes 640 x 576 PAL (or 640 x 480 NTSC).
2. When you have made all the changes required in the Display menu, go to OK and press Enter or
left-click the mouse to save all changes and return to the main menu. Press the Menu button to
return to live mode.
To Next Page
Loading...
