88 TruVision DVR 40 User Manual
Overview of users and PINs
The TVR 40 is shipped with three predefined users: Administrator, Manager, and Operator. The system
administrator is the Admin user and can carry out all operations. Only the system administrator can
manage users. The system administrator can create up to 13 additional individual users and allocate
privileges to each of them.
See Table 13 below for the list of default users and their PINS.
Table 13: Default users and their PINs
Default user name Default PIN
adminr 1234
manager 2222
operator 3333
The factory default User ID is “admin” and its PIN is “1234”. This factory default Administrator name
cannot be changed. However, once you have completed the installation and setup you should
change the admin PIN to protect against unauthorized access.
Caution: Keep the Admin PIN in a safe place. If you should forget it, you must return the TVR 40 unit to
our service center to be reconfigured.
Note: You hear an audible warning when an incorrect user name or PIN is entered. After three incorrect entries,
the unit returns to live mode.
When new users are added to the list, you can give them their own PINs or they can use a default PIN.
All new users must be given user rights as these are not given automatically by the system. Users can
be given local rights to do playback, remote playback, and view logs. You can also give them more
extensive rights that cover both local and remote rights.
Local rights allow you to do local operations of the TVR 40, such as using the front panel and the
IR remote control. Remote rights allow you to use the TVR 40 through the network. See Table 14 for
the list
of rights available.
Table 14: Description of user operational rights
Local rights Description
Record Manual start/stop recording
Edit Menu Locally setup the TVR 40 settings
View Log Locally view the log on TVR 40
System Locally upgrade firmware, format HDD, reboot DVR and shut down the TVR 40, etc.
Remote rights Description
PTZ Remote PTZ control
Record Remote manual start/stop recording
Playback Remote playback, download the recorded files on TVR 40
Edit menu Remote setup the TVR 40 settings
View Log Remote views of the TVR 40 logs
System Remote upgrade firmware, format HDD, reboot TVR 40, and shut down TVR 40, etc.
VOIP Client can talk with TVR 40
Alarm Remote control of the DVR alarm output
Preview Network live mode
Local video play Remote control of the TVR 40 video output
Com Control TVR 40 RS-232 transparent channel function
To Next Page
Loading...
