Hydran* M2-X Instruction Manual
MA-029 Rev. 1.0, 30-Jul-18
9 Maintenance
The maintenance schedule suggested in this Chapter provides optimum
performance and reliability from the Hydran M2-X. The maintenance routines should
be performed in fair weather.
All procedures in this manual must be strictly adhered to.
Any deviation from these could cause irreversible damages
to the Hydran M2-X and/or the transformer being monitored,
and could lead to property damage, personal injury and/or
death. Installation and maintenance of the Hydran M2-X
must be carried out by qualified personnel only.
Note: Some steps in the maintenance procedures described in this Chapter may not
apply, depending on the option(s) installed.
Please advise the station operator prior to maintenance.
Working inside the Hydran M2-X may trigger unwanted
alarms due to parameter changes, power shutdown, system
rebooting or electro-static discharge.
The Hydran M2-X requires very little maintenance.
9.1 Cleaning the Enclosure Exterior
Do not remove the cover, to prevent electric shock.
There are no inside parts that you can service; maintenance or cleaning of
internal parts is not necessary.
To clean the exterior of the enclosure, use a clean cloth that is dry or slightly
damp.
Do not use cleaning agents or chemicals, as they may
damage the plastic parts or lettering.
9.2 Replacing the Fuse
In case the fuse of the Hydran M2-X has blown off, remove the fuse holder and
replace the fuse.
To Next Page
Loading...
Need help?
General
