EasyManua.ls Logo

GE LOGIQ 400 - Page 180

GE LOGIQ 400
526 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GE MEDICAL SYSTEMS
2127661
LOGIQ 400 SERVICE MANUAL
RENEWAL PARTS
6–50
REV 9
OPERATOR CONSOLE ASSY
2127794 – 2127803 : V2.11
2164514 – 2164523 : V3.00
2180828 – 2180837 : V3.10
2212968 – 2212977 : V3.40
2239789, 2239793 – 2239799, 2239804, 2239805 : V4.01
2250251, 2250253 – 2250256, 2250258 – 2250267 : V4.31
2264467 – 2264472, 2264475, 2265935 – 2265941 : V5.01
2197064, 2198442 – 2198445 : LOGIQ 400CL, V3.20
2213911 – 2213915 : LOGIQ 400CL, V3.41
2239832 – 2239836 : LOGIQ 400CL, V4.02
2250270, 2250271, 2255918, 2255919 : LOGIQ 400CL, V4.32
2265944 – 2265947 : LOGIQ 400CL, V5.01
MATERIAL LIST (8/12)
SECTION
PART NAME PART NO. QTY. DESCRIPTION FOR
REFERENCE
FRONT, UPPER & LEFT BLOCK
523 V2.11y INIT’ED HDD KIT 2146597–3 1 1 6–2–75
(3.5–INCH)
V2.50y INIT’ED HDD KIT 2179693–2 1 1 6–2–75
(3.5–INCH)
V3.00Cy INIT’ED HDD KIT 2164542–4 1 1 6–2–75
(3.5–INCH)
V3.10Cy INIT’ED HDD KIT 2180324–4 1 1 6–2–75
(3.5–INCH)
V3.20By INIT’ED HDD KIT 2185221–4 1 1 6–2–75
(3.5–INCH)
V3.30By INIT’ED HDD KIT 2208953–4 1 1 6–2–75
(3.5–INCH)
V3.40Dy INIT’ED HDD KIT 2219189–6 1 1 6–2–75
(3.5–INCH)
V3.41Dy INIT’ED HDD KIT 2219190–6 1 1 6–2–75
(3.5–INCH)
FRU
NO.
FRU
3.5–inch HDD which V/R
2.11y software is installed
3.5–inch HDD which V/R
2.50y software is installed
3.5–inch HDD which V/R
3.00 Cy software is
installed
3.5–inch HDD which V/R
3.10Cy software is installed
3.5–inch HDD which V/R
3.20By software is installed
For LOGIQ 400CL:
2197064, 2198442, 2198443,
2198444, and 2198445
3.5–inch HDD which V/R
3.30By software is installed
3.5–inch HDD which V/R
3.40Dy software is installed
3.5–inch HDD which V/R
3.41Dy software is installed
For LOGIQ 400CL:
2213911, 2213912, 2213913,
2213914, and 2213915
Note
To replace the 2.5–inch HDD with the 3.5–inch HDD, use the HDD Replacement Kit (2160057) and
the 3.5–inch HDD kit initialized with the appropriate software version. Make sure that the settings of
DIP switches and jumper switches are set properly after replacing the HDD. The settings are different
depending on the type of HDD.

Table of Contents

Other manuals for GE LOGIQ 400

Related product manuals