LOGIQ 400 SERVICE MANUALGE MEDICAL SYSTEMS
2127661
INTRODUCTION
1–15
REV 8
1–2–1 Warnings (Continued)
The following table describes the purpose and location of safety labels and other important information provided on the
equipment.
Label/Symbol Purpose/Meaning Location
Identification and Rating
Plate
• Manufacturer’s name and address
• Date of manufacture
• Model and serial numbers
• Electrical ratings
Used to indicate the degree of safety
or protection.
Equipment Type BF (man in the box
symbol) IEC 878–02–03 indicates B
Type equipment having a floating ap-
plied part.
Equipment Type CF (heart in the box
symbol) IEC 878–02–05 indicates
equipment having a floating applied
part having a degree of protection
suitable for direct cardiac contact.
Laboratory logo or labels denoting
conformance with industry safety
standards such as UL or IEC.
The system is not designed for use
with flammable anesthetic gases.
• ”CAUTION” The equilateral
triangle is usually used in combina-
tion with other symbols to advise or
warn the user.
• ”ATTENTION – Consult accompa-
nying documents ” is intended to alert
the user to refer to the operator
manual or other instructions when
complete information cannot be pro-
vided on the label.
• ”WARNING – Dangerous voltage”
(the lightning flash with arrowhead) is
used to indicate electric shock haz-
ards.
Type/Class Label
Device Listing/
Certification Labels
”DANGER – Risk of explosion
used in...”
Rear of console near power
inlet
Probe connectors
and PCG connector
ECG connector and surgical
probes
Rear of console
Rear of console
Various
Various
Left and right side of power
supply unit
To Next Page
Loading...
