GE LOGIQ 400 - Page 28

LOGIQ 400 SERVICE MANUALGE MEDICAL SYSTEMS
2127661

INTRODUCTION
1–16
REV 8
1–2–1 Warnings (Continued)
Rear of system
Adjacent to mains switch
Label/Symbol Purpose/Meaning Location
• ”Mains OFF” Indicates the power
off position of the mains power
switch.
• ”OFF/Standby” Indicates the pow-
er off/standby position of the power
switch.
CAUTION
This Power Switch DOES NOT ISO-
LATE Mains Supply
• ”Mains ON” Indicates the power
on position of the mains power
switch.
• ”ON” Indicates the power on posi-
tion of the power switch.
CAUTION
This Power Switch DOES NOT ISO-
LATE Mains Supply
• ”Protective Earth” Indicates the
protective earth (grounding) terminal.
• ”Equipotentiality” Indicates the ter-
minal to be used for connecting equi-
potential conductors when intercon-
necting (grounding) with other equip-
ment.
• ”Non-Ionizing Radiation” indicates
that the system applies RF energy.
Adjacent to
On–Off/Standby Switch
Not used
Rear of console
Rear of system
Adjacent to mains switch
Adjacent to
On–Off/Standby Switch
Rear of console near power
inlet