GE LOGIQ 400 - Page 297

GE MEDICAL SYSTEMS
2127661
LOGIQ 400 SERVICE MANUAL

RENEWAL PARTS
6–167
REV 9
6–2–61 Rear CONN Panel Assy (FRU No. 501) (continued)
4. Unscrew three screws (
1
–
3
).
5. Loosen one screw (
4
).
6. Disconnect one flat cable (
5
) out of the CNTIF Assy or CNTIF2 Assy.
Note
The CNTIF2 Assy includes the Ethernet port for the DICOM option.
7. Disconnect one flat cable (
6
) out of the AVIF Assy or BVIF Assy.
8. Disconnect two connectors (
7
and
8
). One of them is connected with the Power Supply Unit, and another is
connected with the B/W Printer Panel.
9. Remove the Rear CONN Panel Assy.
REAR CONN PANEL ASSY DISASSEMBLY
ILLUSTRATION 6–85