DIRECTION 5750007-1EN, REV. 1 LOGIQ E10 BASIC SERVICE MANUAL
Chapter 3 LOGIQ E10 Setup 3 - 17
3-4-3 Electrical specifications
Verification of the LOGIQ E10 voltage setting
Verify that the mains voltage specified for the LOGIQ E10 is available on-site.
The voltage setting for the LOGIQ E10 is found on the rating label on the back of the LOGIQ E10 on
lower rear frame.
WARNINGWARNING
CONNECTING A LOGIQ E10 TO THE WRONG VOLTAGE LEVEL WILL MOST LIKELY
DESTROY IT.
Figure 3-5 Rating Label - LOGIQ E10
To Next Page
Loading...
