GE LOGIQ E10 Service Manual

DIRECTION 5750007-1EN, REV. 1 LOGIQ E10 BASIC SERVICE MANUAL
Chapter 1 Introduction 1 - 3
1-2-2 Contents in this service manual
The service manual is divided into ten chapters.
In the beginning of the manual, before chapter 1, you will find the Revision overview, the Important
precautions including Translation policy, Damage in transportation, Certified electrical contractor
statement, Omission & errors, Service safety considerations and Legal notes, and the Table of
Contents (TOC).
An Index has been included after chapter 10.
Table 1-1 Contents in this service manual
CHAPTER
NUMBER
CHAPTER TITLE DESCRIPTION
1
Introduction Contains a content summary and warnings.
2 Site Preparations Contains pre-setup requirements for the LOGIQ E10.
3 LOGIQ E10 Setup Contains setup procedure with procedure checklist.
4 Functional Checks Contains functional checks that must be performed as part of the
installation, or as required during servicing and periodic
maintenance.
5 Components and Functions (Theory) Contains block diagrams and functional explanations of the
electronics.
6 Service Adjustments Contains instructions on how to make any available adjustments to
the LOGIQ E10.
7 Diagnostics/Troubleshooting Provides procedures for running diagnostic or related routines for the
LOGIQ E10.
8 Replacement Procedures Provides disassembly procedures and reassembly procedures for all
changeable FRUs, available option installation instructions, and
upgrade installation instructions.
9 Renewal Parts Contains a complete list of replacement parts for the LOGIQ E10.
10 Care & Maintenance Provides periodic maintenance procedures for the LOGIQ E10.
N/A
Index Provides a quick way to find a topic.

GE LOGIQ E10 Specifications

General

Touchscreen	Yes
3D/4D Imaging	Yes
Applications	Vascular, Cardiac, Musculoskeletal, OB/GYN
Image Storage	USB, Network
Connectivity	DICOM, Ethernet, Wireless