GE LOGIQ E10

DIRECTION 5750007-1EN, REV. 1 LOGIQ E10 BASIC SERVICE MANUAL
Chapter 4 Functional Checks 4 - 1
Chapter 4
Functional Checks
Section 4-1
Overview
4-1-1 Purpose of this chapter
This chapter provides procedures for quickly checking major functions of the LOGIQ E10 Ultrasound
system and diagnostics instructions using the built-in service software.
4-1-2 Contents in this chapter
4-1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
4-2 Functional checks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
4-3 Site Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28
4-1-3 Special Equipment required
• An empty (blank) DVD-R disk
• At least one probe (ideally you should check all the site probes used by the Ultrasound system.)
For available probes, see: Section 7-3 "Service desktop" on page 7-10.
• If option is present, ECG Harness:
- CABLE ECG MARQ. AHA/AMERICA, for P/N, see:
9-16-1 "LOGIQ E10 Cables" on page 9-35.