GE LOGIQ E10 Service Manual

DIRECTION 5750007-1EN, REV. 1 LOGIQ E10 BASIC SERVICE MANUAL
Chapter 4 Functional Checks 4 - 9
4-2-4 Power SHUT DOWN
When you switch OFF the LOGIQ E10, the Ultrasound system performs an automatic Shutdown
sequence.
Table 4-3 SYSTEM - EXIT menu
Steps Corresponding Graphic
1.
The SYSTEM - EXIT menu, used when
switching OFF the LOGIQ E10, gives you
these choices:
Logoff:
Use this button to log off the current user.
The Ultrasound system remains ON and
ready for a new user to log on.
If the Logoff button is dimmed, it indicates
that no user is logged on to the LOGIQ E10
at the moment.
Shutdown:
Use this button to Shut Down the
Ultrasound system. The entire system will
shut down. It is recommended to perform a
full Shutdown at least once a week.
If the Shutdown button is dimmed, press
the ON/OFF button or Atl F10 to shut down
the LOGIQ E10.
Cancel:
Use this button to exit from the SYSTEM -
EXIT menu and return to the previous
operation.
Exit (Only available when logged in as GE
Service with Service Dongle):
Select this button when you want to exit to
the Windows Desktop.

GE LOGIQ E10 Specifications

General

Touchscreen	Yes
3D/4D Imaging	Yes
Applications	Vascular, Cardiac, Musculoskeletal, OB/GYN
Image Storage	USB, Network
Connectivity	DICOM, Ethernet, Wireless