GE LOGIQ E10 Service Manual

DIRECTION 5750007-1EN, REV. 1 LOGIQ E10 BASIC SERVICE MANUAL
Chapter 3 LOGIQ E10 Setup 3 - 33
3-4-11 Logoff/Power shut down
You can use the SYSTEM - EXIT menu to log off, shut down, and exit
The SYSTEM - EXIT menu gives you these choices:
• Logoff
Use this button to log off the current user.
The LOGIQ E10 remains ON and ready for a new user to log on.
If this button is dimmed, it indicates that no user is logged on to the LOGIQ E10 at the moment.
• Shutdown
Use this button to shut down the LOGIQ E10. It is recommended to perform a full shutdown at least
once a week.
If this button is dimmed, press the ON/OFF button or Alt+F10 to shut down the LOGIQ E10.
•Cancel
Use this button to exit from the SYSTEM-EXIT menu and return to the previous operation.
•Exit
Select this button when you want to exit to the Windows Desktop.
Figure 3-21 SYSTEM - EXIT menu

GE LOGIQ E10 Specifications

General

Touchscreen	Yes
3D/4D Imaging	Yes
Applications	Vascular, Cardiac, Musculoskeletal, OB/GYN
Image Storage	USB, Network
Connectivity	DICOM, Ethernet, Wireless