GE LOGIQ E10 Service Manual

DIRECTION 5750007-1EN, REV. 1 LOGIQ E10 BASIC SERVICE MANUAL
5 - 6 Section 5-4 - Software overview
5-4-2 LOGIQ E10 Base Load Image and Application Software
• LOGIQ E10 Software consist of:
- Base Image
* Windows 10 Embedded
* Contains all necessary drivers to support devices and peripherals approved for this
product
- Application Software
* Contains customized Software to perform all functions and features for the LOGIQ E10
• Software Location:
- Software resides in the internal hard drive
Hard Drive Partitions
• Software Installation:
- Software can be loaded/reloaded with USB media.
- C partition (Base+Application) can be reloaded from the Z partition.
- C partition (Base+Application) can be updated through a remote connection to the Service
Back Office.
• Network Capabilities:
- LAN is IPv6 ready.
- System can only be setup for IPv4 or IPv6. They cannot be mixed.
Table 5-2 LOGIQ E10 Partition Layout
Drive Type
Partition
Letter
Usage
GB
(approximately)
SSD
C: Windows 10/application 79
Z: Software Repository 31
HDD
D: User settings/configuration 42
E: Database/data 879
V: Future Use 10

GE LOGIQ E10 Specifications

General

Touchscreen	Yes
3D/4D Imaging	Yes
Applications	Vascular, Cardiac, Musculoskeletal, OB/GYN
Image Storage	USB, Network
Connectivity	DICOM, Ethernet, Wireless