DIRECTION 5750007-1EN, REV. 1 LOGIQ E10 BASIC SERVICE MANUAL
Chapter 6 Service Adjustments 6 - 5
Brightness
Touch panel encoder labeled as Touch Panel Light, rotate for brightness.
Push the mode button once to display the popup and select Unlock or wait for the timeout.
Touch Panel can be adjusted 10% to 100%.
For complete information, refer to the appropriate version of the LOGIQ E10 Basic User Manual,
Chapter 3 or the appropriate LOGIQ E10 Release Notes. See: Section 1-5 "Label locations" on page 1-
26.
Figure 6-1 Touch Panel Adjustment Button