GE LOGIQ E10 Service Manual

DIRECTION 5750007-1EN, REV. 1 LOGIQ E10 BASIC SERVICE MANUAL
7 - 38 Section 7-4 - Troubleshooting
Noise on a board
Table 7-16 Noise on a board
Symptom Solution
There is noise on a board
Isolate the board to see if you can determine the specific board
where the noise originates.
For example, unplug the receive area of the board and see if
the noise persists.

GE LOGIQ E10 Specifications

General

Touchscreen	Yes
3D/4D Imaging	Yes
Applications	Vascular, Cardiac, Musculoskeletal, OB/GYN
Image Storage	USB, Network
Connectivity	DICOM, Ethernet, Wireless