DIRECTION 5750007-1EN, REV. 1 LOGIQ E10 BASIC SERVICE MANUAL
10 - 4 Section 10-3 - Maintenance Task Schedule
Section 10-3
Maintenance Task Schedule
10-3-1 How often should care & maintenance tasks be performed?
The Care and Maintenance task schedule specifies how often your Ultrasound System should be
serviced and outlines items requiring special attention.
NOTE: It is the customer’s responsibility to ensure the Ultrasound System care and maintenance is
performed as scheduled in order to retain its high level of safety, dependability and
performance.
Your GE Service Representative has an in-depth knowledge of your Ultrasound System and can best
provide competent, efficient service. Contact GE for coverage information and/or price for service.
The service procedures and recommended intervals shown in the Care and Maintenance Task
Schedule assumes that you use your Ultrasound System for an average patient load and not use it as
a primary mobile Ultrasound system which is transported between diagnostic facilities.
NOTE: If conditions exist which exceed typical usage and patient load, then it is recommended to
increase the periodic maintenance frequencies.
Refer to the Customer Care Schedule in the service manual for the Ultrasound System for the
recommended maintenance care schedule. See: Table 10-2 "Customer Care Schedule" on page 10-5.
To Next Page
Loading...
Need help?
General
