7.4.3.3 LDAP Server
This page allows configuring the LDAP server for remote authentication.
The information in this page is used when the LDPA authentication mode is selected
in the Security > Security Settings page (see Security Settings section).
Figure 84: Reason H49 Web User Interface – LDAP Server Settings
Attribute Description
LDAP Server IP address LDAP Server’s IP address (for instance 10.17.10.10)
LDAP Server FQDN
Complete domain name of the LDAP Server using the Fully
Qualified Domain Name (FQDN), for instance kiwi.dsagile.intern.
Port Communication port used by the LDAP servers
TLS
Enables the TLS encryption over the LDAP communication
channel
Base DN Base Distinguished Name in the LDAP server
Authentication Mode
Authentication access mode to the LDAP server:
• Simple
• Anonymous
User DN
User account authorized to request data to the LDAP server. It
shall be provided if the Simple Authentication Mode is selected.
Password Password associated to User DN
Connection Timeout
Connection timeout in seconds used for the queries sent to the
LDAP server.
After timeout, the client considers that the requested server is
out of service.
To Next Page
Loading...
